JSG Industrial Systems

Metering Devices

Lubricant Metering Devices

Lubricant metering devices are designed to distribute fixed amounts of lubricant to various lubrication points, or to allocate lubricant to these points consistently over a set time frame. Lubricant metering devices play a crucial role in the effectiveness and efficiency of lubrication systems, with their differentiation rooted in several key criteria.

These devices vary based on the type of lubrication system they are designed for, whether it’s for minimal quantity lubrication or a full-fledged centralized lubrication system. The principle of operation also distinguishes these devices, as some may rely on mechanical action while others might use electrical or pneumatic power to deliver lubricant. 



Types of Metering Devices

VSG Metering Devices

VSG series, with pressures of up to 400 bar (5800 psi), available with up to eight outlets, and each pair of outlets is equipped with an indicator pin for visual monitoring.


SG / SGA Metering Devices

Series (with BPSG base plates), meet industrial needs ranging from small joints to large roller bearings.


SSV Metering Devices

SSV series, can be used with high backpressures (maximum operating pressure is 350 bar), and they are ideally suitable for a wide range of temperatures. Sizes up to 22 outlets.


SSVD Metering Devices

SSVD series, a compact single block, with adjustable output by means of different metering screw sizes.


VPK Metering Devices

The VPK type metering device is a sectional metering device. The metering volume per outlet and cycle of its metering sections ranges from 0,05 cm3 to 0,6 cm3.


SL-1 Injectors

The SL-1 series injectors are designed for single-line, high-pressure, centralised lubrication systems that dispense lubricants that meet NLGI 2 viscosity requirements and are compatible with flouroelastomer packings. The output can be adjusted externally.


SLC injectors

The modular design of the SKF Lincoln SLC injector is intended for use in high-pressure single-line lubrication systems. Additionally, metering screws allow for the adjustment of supply volume, assisting in ensuring that the necessary amount of lubricant is applied to each lubrication point.


SL-6 Injectors

The new SKF Lincoln SL-6 injector is the latest generation of our single-line automatic lubrication system injector. A proven design that is thoroughly updated to meet new demands on maintainability, leakage protection, and long-lasting performance even with harsh extreme pressure greases.


SL-V Injectors

With its innovative rotary drive and modular gear set, the compact and adaptable pump’s motor can be precisely adjusted to suit your application’s needs.


SL-V XL Injectors

High-output injectors of the SL-V XL series are designed for single-line, high-pressure lubrication systems that dispense lubricants that are compatible with polyurethane seals up to NLGI 2. There is an external output adjustment. Visual verification of the injector’s operation is made possible via an indicator stem. It’s simple to remove individual injectors for maintenance or replacement.


Need Assistance?

We're here to assist you in identifying the solution that best aligns with your needs.

How to Buy

JSG partners with authorised distributors to offer you localised sales, installation and service of our products.
Find a local distributor, contact your local JSG sales representative or our friendly customer services team.

Lubrication Systems

Lubrication is critical in machine reliability. We have solutions to help you reach optimum machine reliability, efficiency and safety.

Fire Suppression

Fire poses a significant risk in industrial settings. We offer a range of fire suppression systems to suit your needs.

& Instrumentation

Instrumentation enables better management & control of processes. We offer a range of solutions  to measure and transfer fluids accurately with minimum downtime.