MATERIAL DISPENSING SYSTEMS

Key Products – Lincoln Pump Tubes

The Lincoln range of pump tubes are very versatile and can easily be adapted to a variety of application types. The pump tubes allow the pumps to be adapted for a variety of applications as the tube is an integral part of the system and is responsible for the induction of the material into the pumping chamber.

Pump tubes are available in a ball foot design, Shovel foot design, Plunger and bushing style, and Shovel foot design, packed piston style and they are completely interchangeable with the series 3 air motors.

BALL FOOT DESIGN

The ball foot design is used on light to medium viscosity fluid materials. It offers ratios from 6:1 to 42:1, with outputs to 3.9gpm. They also offer the use of the patented leakless gland as an accessory. It is available in 3 commonly used sizes; Stub for bulk mounting, 60L and 205L drum sizes.

SHOVEL FOOT DESIGN, PLUNGER & BUSHING STYLE

The Shovel foot design is used on medium to high viscosity fluid materials. The shovel foot adds mechanical priming to normal suction, assuring positive prime with the most viscous of lubricants. It is available in ratios from 12:1 to 84:1. It is available in 2 sizes; 60L and 205L drum sizes.

SHOVEL FOOT DESIGN, PACKED PISTON STYLE

The Shovel foot design is used on medium to high viscosity fluid materials. Available in ratios 10:1 to 80:1. It assures a positive prime with the most viscous of lubricants, inks and adhesives. It is available in 3 commonly used sizes; 60L (16Gal) and 205L (55Gal) drum sizes.

TRANSFER SYSTEM

Material is transferred from its original container to another point. Typically, the simple transfer of low-viscosity fluids through relatively short supply lines requires low pressure, high-volume pumps. If higher viscosity fluids are involved, or longer supply lines are required, a pump capable of higher pressures becomes necessary. Transfer systems transfer: Printing inks to press fountains, Adhesives to reservoirs on packaging machinery, Lubricants to smaller containers in remote locations & Materials to high-pressure pumps for spray or flow applications.

MEASURE SYSTEM

Material is pumped from original containers through the supply lines to measuring valves or ejectors, which in turn meter precise amounts of material to a work piece. Typical measure systems include: Multiple shots in patterns of adhesives used to bond substrates, such as automobile hoods and doors, Measured lubricant applied to electric motors in appliance manufacturing, Single-shot applications of adhesives or sealants used in manufacturing & Cartridge filling lines.

FLOW SYSTEM

Material is pumped from the original container through the supply line to a flow gun which applies the material to a work piece. Typical flow systems include: Adhesives applied to substrates for bonding in construction and other industries, Adhesives used in the manufacture of modular or mobile homes, Sealants applied during manufacturing to various parts of vehicles, including sun shields, tail lights, weld lines and hem flanges & Recommended for use where normal pump operation does not exceed 45 cycles per minute.

MINING

Mining is one of the most challenging environments for your machinery. The correct choice of material dispensing systems can minimise contamination, thereby ensuring the productivity of your equipment.

AGRICULTURE

To help farmers achieve maximum machine availability and high crop yield, selecting the best ancillary systems for your agricultural equipment ensures your total investment is protected.

FOOD & BEVERAGE

In todays highly-automated food processing plants, reliable material dispensing systems are crucial. Examples include pump systems for ingredients or food additives, and sanitary washdown systems for food processing equipment.

PRINTING

Automated and centralised ink supply systems ranging from simple systems for sheet-fed offset printing, complete container systems for heat-set rotation printing, or bulk tank systems for newspaper applications.

RAIL TRANSPORT

Rail transport systems are highly demanding, and must meet stringent safety requirements. Our fuel and oil dispensing systems ensure efficient & clean refuelling of locomotives and workshop service bays.

OTHER INDUSTRIES

Material dispensing systems provide considerable benefits to a number of other industries. These include Manufacturing, Glass Production & Metalworking

Please fill in all the Required fields to complete this online enquiry and we will get back to you within 1 business day.