MATERIAL DISPENSING SYSTEMS

Key Products – Lincoln PMV Pumps

The new Lincoln PMV grease and oil pumps have been developed to offer exceptional performance, a long service life and low maintenance costs. The unique, patent pending modular design is based on Lincoln’s proven PowerMaster III air logic and includes only five moving parts, providing a longer life to the pump through a smaller number of wearing parts making it easier to service in the field.

The PMV is available in two air motor sizes: 3” and 4-1/4”. The PMV pump is offered in a wide range of ratios as well as stationary and portable configurations and is ideal for the lubricant dispensing and transfer applications in vehicle service, mining, construction and manufacturing applications.

Featuring:
• Modular design, fastened by four bolts
• Precision machined from aircraft grade aluminium
• Runs without external lubrication
• No springs rods, levers or slides
• Able to work in a contaminated air supply

PMV AIR CYLINDER

Designed from 1 piece casting to reduce leakage passages, the PMV air cylinder contains all ports and passages to simplify repairs. The single piece piston has no connection to any rods poppets or springs. This helps to reduce premature mechanical failures.

FOLLOWER PLATES

Deluxe universal follower for use with 25-50 lb. containers for 1", 1-1/4", 1-1/2" diameter pump tubes. All rubber unit ensures complete grease dispensing to the bottom of dented or plastic lined drums; wipes pail or drum clean. Metal cap holds insert firmly in place, ensuring seal and vacuum.

3" AND 4.25" PMV OIL PUMPS

The PMV 3” - 5:1 model Oil Pump has a free flow rate of 26.5 lpm. The 4.25” - 6:1 model Oil Pump has a free flow of 26.5 lpm and for the 4.25” 10:1 model Oil Pump, the free flow rate is 18.4 lpm. The bare oil pumps are of stub design for wall mounting.

3" AND 4.25" PMV GREASE PUMPS

The PMV 3” - 50:1 model Grease Pump has a free flow rate of 2753cc/min.6.5 lpm. and for the 4.25” 50:1 model Grease Pump, the free flow rate is 3606cc/min. The pump fits 20kg, 60kg and 180kg drum sizes.

TRANSFER SYSTEM

Material is transferred from its original container to another point. Typically, the simple transfer of low-viscosity fluids through relatively short supply lines requires low pressure, high-volume pumps. If higher viscosity fluids are involved, or longer supply lines are required, a pump capable of higher pressures becomes necessary. Transfer systems transfer: Printing inks to press fountains, Adhesives to reservoirs on packaging machinery, Lubricants to smaller containers in remote locations & Materials to high-pressure pumps for spray or flow applications.

MEASURE SYSTEM

Material is pumped from original containers through the supply lines to measuring valves or ejectors, which in turn meter precise amounts of material to a work piece. Typical measure systems include: Multiple shots in patterns of adhesives used to bond substrates, such as automobile hoods and doors, Measured lubricant applied to electric motors in appliance manufacturing, Single-shot applications of adhesives or sealants used in manufacturing & Cartridge filling lines.

FLOW SYSTEM

Material is pumped from the original container through the supply line to a flow gun which applies the material to a work piece. Typical flow systems include: Adhesives applied to substrates for bonding in construction and other industries, Adhesives used in the manufacture of modular or mobile homes, Sealants applied during manufacturing to various parts of vehicles, including sun shields, tail lights, weld lines and hem flanges & Recommended for use where normal pump operation does not exceed 45 cycles per minute.

MINING

Mining is one of the most challenging environments for your machinery. The correct choice of material dispensing systems can minimise contamination, thereby ensuring the productivity of your equipment.

AGRICULTURE

To help farmers achieve maximum machine availability and high crop yield, selecting the best ancillary systems for your agricultural equipment ensures your total investment is protected.

FOOD & BEVERAGE

In todays highly-automated food processing plants, reliable material dispensing systems are crucial. Examples include pump systems for ingredients or food additives, and sanitary washdown systems for food processing equipment.

PRINTING

Automated and centralised ink supply systems ranging from simple systems for sheet-fed offset printing, complete container systems for heat-set rotation printing, or bulk tank systems for newspaper applications.

RAIL TRANSPORT

Rail transport systems are highly demanding, and must meet stringent safety requirements. Our fuel and oil dispensing systems ensure efficient & clean refuelling of locomotives and workshop service bays.

OTHER INDUSTRIES

Material dispensing systems provide considerable benefits to a number of other industries. These include Manufacturing, Glass Production & Metalworking

Please fill in all the Required fields to complete this online enquiry and we will get back to you within 1 business day.