MATERIAL DISPENSING SYSTEMS

Key Products – Lincoln PileDriver III Pumps

For high volume application of viscous materials from standard drums or bulk tanks, these industry-standard pumps incorporate the same completely pneumatic, modular air motors.

Along with the airbrake option and a wide variety of packing materials, PileDriver III pumps feature a patented leakless gland design that protects the pump from gland seal failure and subsequent down time for replacement. The pump is also available with a hydraulic motor configuration where needed.

Available with a fully pneumatic air motors reverse stroke direction without mechanical linkages and are simpler and more reliable than previous designs. The Air motors come in 5 sizes; 3,4,6,8 and 10”.

• Commonly used with transferring inks to press fountains
• Adhesives to reservoirs on packaging machinery
• Lubricants to smaller containers in remote locations
• Materials to high pressure pumps for spray or flow applications

PRESSURE PRIMERS

Pressure primers provide positive priming force on the material. The downward force of the follower will force the material into the pump inlet. This assures positive priming of high viscosity materials. Lincoln has primers for 20L (5Gal), 205L (55Gal) and 1,140L (300Gal) containers.

PILEDRIVER III PUMP TUBES

Produced from a solid machined inlet casting the design allows for 360 degree rotation of the outlet to help facilitate system pipework installation The Load bearing chrome plated internal pump tube surface distributes forces between the gland and the pump tube for prolonged life.

PILEDRIVER III STANDPIPE ASSEMBLY

The Standpipe assembly allows the Piledriver pump to be mounted on the floor. A benefit of this is that it will allow for the pump to draw from the suction port on a bulk tank. Uses a 3” inlet and has 4 bolt holes available for mounting. There is a wide range of stand pipe options available.

TRANSFER SYSTEM

Material is transferred from its original container to another point. Typically, the simple transfer of low-viscosity fluids through relatively short supply lines requires low pressure, high-volume pumps. If higher viscosity fluids are involved, or longer supply lines are required, a pump capable of higher pressures becomes necessary. Transfer systems transfer: Printing inks to press fountains, Adhesives to reservoirs on packaging machinery, Lubricants to smaller containers in remote locations & Materials to high-pressure pumps for spray or flow applications.

MEASURE SYSTEM

Material is pumped from original containers through the supply lines to measuring valves or ejectors, which in turn meter precise amounts of material to a work piece. Typical measure systems include: Multiple shots in patterns of adhesives used to bond substrates, such as automobile hoods and doors, Measured lubricant applied to electric motors in appliance manufacturing, Single-shot applications of adhesives or sealants used in manufacturing & Cartridge filling lines.

FLOW SYSTEM

Material is pumped from the original container through the supply line to a flow gun which applies the material to a work piece. Typical flow systems include: Adhesives applied to substrates for bonding in construction and other industries, Adhesives used in the manufacture of modular or mobile homes, Sealants applied during manufacturing to various parts of vehicles, including sun shields, tail lights, weld lines and hem flanges & Recommended for use where normal pump operation does not exceed 45 cycles per minute.

MINING

Mining is one of the most challenging environments for your machinery. The correct choice of material dispensing systems can minimise contamination, thereby ensuring the productivity of your equipment.

AGRICULTURE

To help farmers achieve maximum machine availability and high crop yield, selecting the best ancillary systems for your agricultural equipment ensures your total investment is protected.

FOOD & BEVERAGE

In todays highly-automated food processing plants, reliable material dispensing systems are crucial. Examples include pump systems for ingredients or food additives, and sanitary washdown systems for food processing equipment.

PRINTING

Automated and centralised ink supply systems ranging from simple systems for sheet-fed offset printing, complete container systems for heat-set rotation printing, or bulk tank systems for newspaper applications.

RAIL TRANSPORT

Rail transport systems are highly demanding, and must meet stringent safety requirements. Our fuel and oil dispensing systems ensure efficient & clean refuelling of locomotives and workshop service bays.

OTHER INDUSTRIES

Material dispensing systems provide considerable benefits to a number of other industries. These include Manufacturing, Glass Production & Metalworking

Please fill in all the Required fields to complete this online enquiry and we will get back to you within 1 business day.