Engine Prelubrication & Evacuation

ENGINE PRELUBRICATION & EVACUATION

Overview of Engine Prelubrication & Evacuation

All engines suffer from accelerated wear as a result of periodic dry starts with today’s high performance fast starting diesels & larger engine capacity. These dry starts can occur in any climate, after prolong shut down or following routine oil changes.

When the machine is then shut down for whatever reason, damage can occur to the turbo bearings due to hot oils now sitting around the bearings. The RPM Industries range of Prelubrication products address both the start-up issue using the Prelub™ unit and the cooling of oils at shut down is handled by the Post Lube system.

Machine maintenance has become a nightmare. Different makes & models. Different service locations. No room to move. Different service requirements. Environmental spills are increasingly costly. Machines sit idle for hours during “simple” oil changes. Potential injury removing hot filters & climbing around the machine with hot oil present. The maintenance process should be based on a simple & safe idea, “servicing machines should not be so hard”.

RPM Industries have now developed a solution called the PERT™ process (Purge, Evacuate, Refill, Timestamp) which is a simple closed loop process to standardise your entire fluid (engine, transmission, hydraulic) maintenance operation. It’s safe, clean, fast and repeatable. No matter the make or model of the machine, the location or the conditions the PERT™ process is always the same across all brands & equipment.

RPM QUICKFIT™

The QuickFit™ system utilises the PERT™ process, (Purge, Evacuate, Refill, Timestamp) to evacuate the fluid. With just one fitting per compartment, the QuickFit™ system allows workshop service technicians to perform an oil & filter change on most machines in less than 30 minutes. It is designed for machines that are serviced at a central workshop.

RPM PRELUB™

The Prelub™ is an engine pre-lubrication system that reduces engine wear by automatically building engine oil pressure before the engine is allowed to crank. Through this process it eliminates premature wear & tear associated with dry starts.



RPM MULTIVAC™

The MultiVac™ system utilises the PERT™ process, (Purge, Evacuate, Refill, Timestamp) to evacuate engine oil & other compartment’s fluids. With a fitting per each compartment, the MultiVac™ system allows the field service technician to perform an oil & filter change plus other oil based reservoirs in very quick time while in the field. It means the machine does not have to be moved from the working site back to the workshop to have an oil change.

RPM POST LUBE

At shutdown with bearings surrounded by hot oil, in particular the turbo bearings which experiences extreme heat, can cause premature damage to the bearings. The Post Lube system automatically circulates oil after shutdown without requiring the engine to idle. The Post Lube system is offered as an added feature with the Prelub™ or as a standalone solution.


RPM QUICKEVAC™

The QuickEvac™ system utilises the PERT™ process, (Purge, Evacuate, Refill, Timestamp) to evacuate the fluid. With just one fitting per compartment, the QuickFit™ system allows the field service technician to perform an oil & filter change in less than 20 minutes while in the field. It means the machine does not have to be moved from the working site back to the workshop to have an oil change. In 20 minutes oil changed & machine immediately back in work.

MINING

For the mining applications we offer a HP version in 4.5 and 9kg variant. Designed specifically for hard working and dusty environments they utilise a high 80BE rating.

AGRICULTURE

An excellent range is available for Agricultural machine use and also processing plants. The standard 9kg Air/water extinguisher and Carbon dioxide 3.5kg and 5kg are must haves.

ONROAD TRANSPORT

Fleet operations, transport companies & private owners are under constant pressure to save money & increase machine availability. With stopping every few hours & starting up cold, engine failures reduced with the Prelub™. For fleet owners the oil change process can be sped up using the “QuickFit”.

RAIL TRANSPORT

Rail transport systems are highly demanding and must meet stringent safety requirements. Fitting the “QuickFit” within the workshop will ensure clean quick oil changes of locomotives within the workshop.



CONSTRUCTION EQUIPMENT

The high asset cost of mobile plant requires constant attention to engine start-up & maintenance. The Prelub™ on board removes the start-up concerns, while the “QuickEvac” allows for engine, transmission &\or hydraulic oil changes to take place at the working face and the utilisation of “QuickFit” in the workshop to speed up oil changes.

OTHER INDUSTRIES

There are many other industries which requires constant machine maintenance. These includes Marine, Quarries, Gen Sets plus many more...

SAFETY AND OIL SPILL BENEFITS

Duration: 1.03

Author: RPM Industries

RPM offers a complete line of oil evacuation and fluid evacuation systems for engines. Our QuickFit evacuation systems are designed for mess free, fast and safe oil and fluid changes saving time and money.

QUICKFIT PROCESS VIDEO

Duration: 0.29

Author: RPM Industries

This video will show how the patented PERT process is used with the QuickFit system..

QUICKFIT SERVICE DEMONSTRATION

Duration: 3.14

Author: RPM Industries

This is an overview of the QuickFit Oil Evacuation Technology. This is a complete oil and and filter change.

OIL & FLUID EVACUATION SYSTEMS - PERT PROCESS

Duration: 3.19

Author: RPM Industries

RPM offers a complete line of oil evacuation and fluid evacuation systems for engines. The QuickEvac and MultiVac evacuation systems are designed for mess free, fast and safet oil and fluid changes saving time and money.

RPM INDUSTRIES' QUICKEVAC SYSTEM

Duration: 6.52

Author: SLG Web Design

RPM Industries' engine prelube and oil evacuation systems are manufactured in the USA for industries utilizing diesel or gas engines. We have specialized in prelube and evacuation systems for over 20 years.

Please fill in all the Required fields to complete this online enquiry and we will get back to you within 1 business day.